深圳SGS提供ASTM C610膨脹珍珠巖模制板狀和管狀絕熱材料測試服務

SGS offer ASTM C610 molded expanded perlite block and pipe thermal insulationTesting Services

Key words: ASTM C610, block, expanded perlite, fittings; molded; pipe, thermal Insulation, thermal conductivity, 膨脹珍珠巖, 模制板, 導熱系數,熱阻, 熱阻測試, 隔熱, 絕熱, 保溫, 絕熱材料, SGS測試

膨脹珍珠巖模制板、配件、管件絕熱材料的主成分通常是膨脹珍珠巖、硅酸鹽粘合劑，可能還含有纖維增強材料。

ASTM C610-15 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation¹

ASTM C610-15 膨脹珍珠巖模制板狀和管狀絕熱材料標準規范¹

此規范涵蓋使用表面溫度在80至1200華氏度（27℃至649℃）的膨脹珍珠巖模制板狀、配件、管狀絕熱材料。

ASTM C610-15標準規范中物理性能測試要求及測試標準如下：

ASTM C610   Dimensional tolerances尺寸偏差

ASTM C585   Inner diameter & Outer diameter內徑外徑

ASTM C303   Density of Block insulation 板狀密度

ASTM C302 Procedure A   Pipe insulation 管狀密度

ASTM C1045 ASTM C177   block insulation板狀導熱系數

ASTM C335   Apparent thermal conductivity of  Pipe insulation 管狀導熱系數

ASTM C356   Linear shrinkage after heat soaking(649℃)線性收縮

ASTM C203 method 1(3 point),procedure D   Flexural strength(Block insulation only)彎曲強度(板狀)

ASTM C165 procedure A   Compressive resistance(Block insulation only) 抗壓強度(板狀)

ASTM C421   Mass loss by tumbling after 10 minutes   10分鐘翻轉損失

ASTM C1616   Moisture content含水率

ASTM C610   Water absorption after heat aging熱老化后吸水率

ASTM E84   Surface burning characteristics表面燃燒特性

ASTM C411   Hot-surface performance熱面性能(649℃)

ASTM C795   Stress corrosion cracking of austenitic stainless steel應力腐蝕性能

ASTM E136   Non-combustible不燃性